- Front Partial Repair Panel
Wide At Front
Wide At Back
- 19 Gauge Metal Thickness
- Left (Driver's Side)
- Accelerator Pedal Bracket P/N 02-0835 Must Be Used For Proper Pedal Placement - Sold Separately
Measurements may vary slightly. Measurement are given as a guideline only. Never cut out your original panels before receiving replacements.
The El Camino Store stamped steel sheet metal floor pan repair panels are crucial when rust rears its ugly head. 1959 or 1960 El Camino floor pans take a beating over the years and are rarely rust-free. The El Camino Store sources sheet metal floor pans from the world’s premium manufacturers to bring you only the very best for your El Camino restoration. Floor pans are stamped on heavy ton equipment from correct gauge steel to ensure factory style contours and maximum rigidity over originals. This left side partial front floor pan reaches from the footwell toe panel to the rear edge of the front seat. The floor pans from The El Camino Store must be welded in and usually fitted, so never cut out your original floor pans before receiving replacements. We highly recommend the use of a skilled body shop when installing replacement El Camino floor pans and to always check other related items such as floor braces, rocker panels, toe panels and seat supports for other potential replacement needs. We have sold thousands of sheet metal floor pans and will stand by each purchase to make sure that your El Camino is restored to perfection. From racers, hot rods or daily drivers, trust The El Camino Store for all of your restoration and replacement needs for your 1959 or 1960 El Camino!