1967-1974 El Camino is a great hot rod. Whether you are hearing unwanted rattling vibrations from your transmission, or you're starting to experience clutch failure, chances are that you are in great need of a new flywheel bellhousing dust cover plate for your El Camino with an 10.5" clutch and manual transmission. Without a dust cover inspection plate or with one that is very worn down, your ring gear is exposed to constant dirt and road debris. Over time, debris and other objects can clog up your flywheel and clutch area, causing premature clutch failure. Clutch failure in your Chevrolet can be reported from a feeling of "slipping," where the clutch does not fully engage or disengage. Further wear on your clutch can cause overheating until the clutch will eventually fail altogether, which can be a dangerous situation. The El Camino Store offers this 403 style flywheel bellhousing dust inspection cover plate, made from stamped steel with a black glossy finish. This original GM metal plate for your 302 Z28 attaches to the bellhousing and promises to protect the flywheel and clutch from any future road debris. This dust shield will also keep outside debris away from your ring gear and flexplate. You will not have to remove your transmission to apply a new dust cover inspection plate, so installation should be simple and effective. From racers, show cars, hot rods, and daily drivers, you can trust The El Camino Store for all of your restoration and replacement needs for your 1976, 1977, 1978, 1979, 1980, 1981 Chevy El Camino. Trust The El Camino Store for all your part needs.
|Combined Cancer/Birth Defect|