Must ship Oversize 1
Details: Calipers to be used:
Cutlass 78-88, Regal 78-87, El Camino 78-88,
Camaro 82-89, Malibu 78-83, firebird 82-89
Rotors 7/16 Thred lug nuts:
Cutlass 79-81, Monte Carlo 79-81, El Camino 79-81,
Grand Prix 79-81, Regal 79-81, Lemans 79-81
Rotors- Metric Thread Lug Nuts:
Cutlass 82-89, Camaro 82-87, Firebird 82-87, El Camino 82-87, Grand Prix 82-87, Monte Carlo 82-88, Malibu 82-83.
Installation Instructions:
1- Spindles are marked LH (driverside) RH (passanger side) & should be installed that way. Calipers will mount towards the back.
2-Calipers should be mounted with bleeder screw towards top.
3-Original steering arms should be installed with bolts the bolts supplied for the spindles.
4-Bearings & seals for the above rotors should be used.
5-The brake hoses to be used are from 79-81 Camaro or Firebird .
6-Banjo bolts for the brake hoses are M-10 thread & are used on the above calipers.
7-Brakes should be properly bled to insure there is no air trapped in the brake lines.
8-After installing the spindles the front end alignment must be checked & adjusted.
9-Check turning of spindles for rubbing or hitting on A-frames.
10- When up-grading the brake system to a disc/drum brake system, it's necessary to install a proportioning value.
11-We recomend installing a dual resovoir master cylinder & a power booster.
12-When installing the spindles always use the proper tools & equipment to make the job a safe one.
|
